Accsoon CineView SE Wireless Video Transmitter and Receiver,Dual-Band Transmission,Range of 1200 ft/350m,Latency 0.05s&1080P HD Video , HDMI and SDI,Support 4 Devices

Product Information

One transmitter can stream to up to four iOS or Android devices. You can use a combination of Android or iOS devices, as long as you aren’t using any more than four. The main foyer and counters are on the first floor, and are accessible by escalator and lift. There's step-free access to the wheelchair spaces and adjoining seats, and an accessible toilet by the entrance to screens two, four and nine, and on the second floor by the rear of screens two and three. The picture quality of the signal coming up on the app is pretty good. It will probably be good enough for most people who are buying a system such as this. In all honesty, it is one of the better-looking pictures I have seen from a wireless app-based system at this price. Image Delay

There is also peaking and zebras and you can change the intensity and color of the peaking, but only the intensity of the zebras. Strangely the zebras come up as a rep/purplish color. Since that time Accsoon has released a lot of different wireless video systems with different functionality at different price points. I have reviewed quite a few of them and they have generally performed well compared to the competition.

Price & Availability

With this in mind, I decided to test the range and performance of the system. To test the range of the system I remained in line of sight of the camera and TX unit and started walking away with the app running on my iPhone and with an RX unit attached to an external monitor. I found that I could get around 350m (1148′) and still have a stable signal on the app the app and on the monitor that was attached to the RX unit. I ended up running out of straight road for this test and I think I could have gone even further and still had a signal. At power-on the CineView HE will automatically select the best available channel for audio and video transmission. To pair CineView HE transmitter and receivers simply rotate the knob on both to the same number - it’s that simple. The transmitter and receiver are now successfully paired. If you want to have the HDMI input on the same side as the HDMI output of your mirrorless hybrid, then you can simply just face the front of TX unit forward. The only caveat with doing this is that you can’t see the screen anymore. What do you get? At power on, the CineView HE will automatically select the best channel for audio and video transmission.

Accsoon does now face very stiff competition from a wide array of affordable wireless video systems that have come to market from various manufacturers. What it is and what it isn’tThe Phantom Camera Control (PCC) software is Windows-only and has been fully verified with Windows 10 64-bit. You can also choose to power the unit through the DC input (7.4V to 16.8V) if need be. If you are inputting a 7.4V to 16.8V DC signal you can also run a battery and then hot swap that battery without the unit turning off. What I like to do is to run a DC input in combination with a smaller-sized NP battery. That way when I have to change my camera battery over, the wireless TX stays on even when I turn the camera off. The DC input is always prioritized over the battery. The CineView HE uses an all-new version of the computing platform from the acclaimed CineEye series. After years of painstaking development, the result is a system that is even faster, smaller, more efficient and cooler running than before. As a result, the CineView HE has incredibly low power consumption and a single NP-F970 battery can last up to 12 hours. PCC includes the ability to perform basic measurement functions for motion analysis. The results can be viewed immediately and then automatically saved to a spreadsheet for review. The CineEye 2S uses HEVC compression and as I have already mentioned, it can send video signals up to 1080 60p.